{"id":17346,"date":"2020-04-25T03:10:58","date_gmt":"2020-04-25T03:10:58","guid":{"rendered":"https:\/\/www.meetyoucarbide.com\/?post_type=jetpack-portfolio&p=17346"},"modified":"2020-04-30T03:44:45","modified_gmt":"2020-04-30T03:44:45","slug":"cutting-tool-blanks","status":"publish","type":"jetpack-portfolio","link":"https:\/\/www.meetyoucarbide.com\/pl\/portfolio\/cutting-tool-blanks\/","title":{"rendered":"Cutting Tool Blanks"},"content":{"rendered":"
\n

\n\tCut-to-Length (CTL) Tungsten Carbide Rod, Ground, Polished, Chamfer one end\n\t<\/h2>\n\t

We have one of the largest and most complete lines of ground CTL carbide rods for cutting tool blanks in stock. Meetyou Carbide proudly announces that we have achieved the best cost-effectiveness for this kind of rods for cutting tool blanks. Because we use a unique method of pressing technology combined with the supreme quality powder from Germany H.C.Starck.<\/p>\n

\n\th6
Polished.<\/strong>\n\t<\/h2>\n\t

Our standard tolerance for the diameter is h6 polished. We can also provide h5 polished or other tolerance as per your requirement.<\/p>\n

\n\tLength
Cut.<\/strong>\n\t<\/h2>\n\t

Both advanced wire cutting and diamond wheel cutting are applied to cut the carbide rod into the length you need.<\/p>\n

\n\tOne End
Chamfered<\/strong>\n\t<\/h2>\n\t

45 degree chamfered one end is provided for better looking and a smooth edge.<\/p>\n\t

    \n
  • Complete lines of ground cut to length carbide rod for cutting tool blanks<\/li>\n
  • Standard h6 ISO diameter tolerances in inch and metric lengths and diameters<\/li>\n
  • Special perform like male center, female center, ball nose, step reduction, and shaped points, etc are available according to your drawing<\/li>\n<\/ul>\n

    \n\tStandard Size ,Metric, Milimeter\n\t<\/h3>\n\t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    \n\u03a63.0 X 60\n<\/td>\n\n\u03a68.0 X 50\n<\/td>\n\n\u03a612.0 X 120\n<\/td>\n<\/tr>\n
    \n\u03a64.0 X 40\n<\/td>\n\n\u03a68.0 X 60\n<\/td>\n\n\u03a613.0 X 100\n<\/td>\n<\/tr>\n
    \n\u03a64.0 X 46\n<\/td>\n\n\u03a68.0 X 63\n<\/td>\n\n\u03a614.0 X 75\n<\/td>\n<\/tr>\n
    \n\u03a64.0 X 50\n<\/td>\n\n\u03a68.0 X 75\n<\/td>\n\n\u03a614.0 X 80\n<\/td>\n<\/tr>\n
    \n\u03a64.0 X 60\n<\/td>\n\n\u03a68.0 X 90\n<\/td>\n\n\u03a614.0 X 83\n<\/td>\n<\/tr>\n
    \n\u03a64.0 X 75\n<\/td>\n\n\u03a68.0 X 100\n<\/td>\n\n\u03a614.0 X 100\n<\/td>\n<\/tr>\n
    \n\u03a64.0 X 100\n<\/td>\n\n\u03a610.0 X 50\n<\/td>\n\n\u03a616.0 X 80\n<\/td>\n<\/tr>\n
    \n\u03a65.0 X 50\n<\/td>\n\n\u03a610.0 X 70\n<\/td>\n\n\u03a616.0 X 90\n<\/td>\n<\/tr>\n
    \n\u03a65.0 X 60\n<\/td>\n\n\u03a610.0 X 72\n<\/td>\n\n\u03a620.0 X 100\n<\/td>\n<\/tr>\n
    \n\u03a65.0 X 100\n<\/td>\n\n\u03a610.0 X 75\n<\/td>\n<\/td>\n<\/tr>\n
    \n\u03a66.0 X 40\n<\/td>\n\n\u03a610.0 X 80\n<\/td>\n<\/td>\n<\/tr>\n
    \n\u03a66.0 X 50\n<\/td>\n\n\u03a610.0 X 90\n<\/td>\n<\/td>\n<\/tr>\n
    \n\u03a66.0 X 58\n<\/td>\n\n\u03a610.0 X 100\n<\/td>\n<\/td>\n<\/tr>\n
    \n\u03a66.0 X 60\n<\/td>\n\n\u03a612.0 X 70\n<\/td>\n<\/td>\n<\/tr>\n
    \n\u03a66.0 X 67\n<\/td>\n\n\u03a612.0 X 79\n<\/td>\n<\/td>\n<\/tr>\n
    \n\u03a66.0 X 75\n<\/td>\n\n\u03a612.0 X 83\n<\/td>\n<\/td>\n<\/tr>\n
    \n\u03a66.0 X 100\n<\/td>\n\n\u03a612.0 X 100\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    \n\tOEM Custom Service<\/b>\n\t<\/h2>\n\t

    We can develop grades as per your requirement and make the same shape as your drawing. Laser marking and neutral package are also available for your benefits.<\/p>\n

    \n\tGrade\n\t<\/h3>\n\t\t\tGrade Chart\n\t\t
    grade<\/td> <\/td>MT09U<\/td>MT10S<\/td>MT12S<\/td>MT25S<\/td>MT06U<\/td>MT20.8<\/td><\/tr>
    ISO range<\/td> <\/td>K10-K20<\/td>K20-K40<\/td>K20-K40<\/td>K20-K40<\/td>K05-K10<\/td>K40-K50<\/td><\/tr>
    WC+other carbide<\/td>%<\/td>91<\/td>90<\/td>88<\/td>88<\/td>93.5<\/td>85<\/td><\/tr>
    Co<\/td>%<\/td>9<\/td>10<\/td>12<\/td>12<\/td>6.5<\/td>15<\/td><\/tr>
    WC grain size<\/td>\u03bcm<\/td>0.4<\/td>0.8<\/td>0.6<\/td>0.4<\/td>0.6<\/td>0.8<\/td><\/tr>
    density<\/td>g\/\u339d\u00b3<\/td>14.5<\/td>14.42<\/td>14.12<\/td>14.1<\/td>14.85<\/td>13.95<\/td><\/tr>
    hardness<\/td>Hv30<\/td>1890<\/td>1600<\/td>1580<\/td>1750<\/td>1890<\/td>1350<\/td><\/tr>
    HRA<\/td> <\/td>93.5<\/td>91.5<\/td>91.2<\/td>92.5<\/td>93.5<\/td>89.5<\/td><\/tr>
    transverse rupture strength<\/td>N\/mm\u00b2<\/td>3800<\/td>4100<\/td>4200<\/td>4400<\/td>3700<\/td>3800<\/td><\/tr>
    kpsi<\/td> <\/td>590<\/td>609<\/td>638<\/td>540<\/td>551<\/td>551<\/td><\/tr>
    fracture toughness<\/td>Mpa.m\u00bd<\/td>10.2<\/td>14.2<\/td>14.7<\/td>13.5<\/td>10.1<\/td>17.5<\/td><\/tr>
    young\u2019s modulus<\/td>kpsi<\/td>86780<\/td>85360<\/td>80860<\/td>80000<\/td>91000<\/td>79086<\/td><\/tr>
    compressive strength<\/td>kpsi<\/td>1145<\/td>1015<\/td>1010<\/td>1109<\/td>1156<\/td>957<\/td><\/tr><\/tbody><\/table>\n\t\t\tThe Application\n\t\t
    Grade<\/td>Properties and applications<\/td><\/tr>
    MT09U <\/td>Ultra-fine grain WC with 9%Co Very high wear resistance and excellent deformation resistance High cutting speed milling, finishing For use on hardened steel, plastics, fibre reinforced materials, HRC55-65<\/td><\/tr>
    MT10S <\/td>Ultra-fine grain WC with 10%Co  Very high wear resistance and excellent deformation resistance High cutting speed milling&drilling For general usage and suitable for all kinds of material belowHRC45<\/td><\/tr>
    MT12S <\/td>Submicron grain WC with 12%Co High toughness and wear resistance Specially designed for machining stainless steel For use on stainless steel, nickel-based alloys, titanium alloy and special alloy<\/td><\/tr>
    MT25S <\/td>Ultra-fine grain WC with 12%Co Very high toughness and high wear resistance Suitable for finishing processing and roughing of steels with hardness between 45 and 55HRC steels for surface treatments, nickel and nickel alloys<\/td><\/tr>
    MT06U <\/td>Submicron grain WC with 6% Co Very high wear resistance High cutting speed For drilling and milling of plastic composites, PCB, ceramics, woods and MDF<\/td><\/tr>
    MT20.8 <\/td>Submicron grain WC with 15%Co High strength and toughness High-speed punching For use on solid carbide punches<\/td><\/tr><\/tbody><\/table>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Cut-to-Length (CTL) Tungsten Carbide Rod, Ground, Polished, Chamfer one end We have one of the largest and most complete lines of ground CTL carbide rods for cutting tool blanks in stock. Meetyou Carbide proudly announces that we have achieved the best cost-effectiveness for this kind of rods for cutting tool blanks. Because we use a…<\/p>\n","protected":false},"author":1,"featured_media":17282,"comment_status":"closed","ping_status":"closed","template":"","format":"standard","meta":{"footnotes":""},"jetpack-portfolio-type":[74],"jetpack-portfolio-tag":[],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/jetpack-portfolio\/17346"}],"collection":[{"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/jetpack-portfolio"}],"about":[{"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/types\/jetpack-portfolio"}],"author":[{"embeddable":true,"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/comments?post=17346"}],"version-history":[{"count":0,"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/jetpack-portfolio\/17346\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/media\/17282"}],"wp:attachment":[{"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/media?parent=17346"}],"wp:term":[{"taxonomy":"jetpack-portfolio-type","embeddable":true,"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/jetpack-portfolio-type?post=17346"},{"taxonomy":"jetpack-portfolio-tag","embeddable":true,"href":"https:\/\/www.meetyoucarbide.com\/pl\/wp-json\/wp\/v2\/jetpack-portfolio-tag?post=17346"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}