29 aprile 2020

Tungsten Carbide Drawing Dies

Tungsten carbide drawing dies, also called as cemented carbide drawing pellets are widely used in drawing metal and non-metal industry. They can be used in drawing steel wires, steel bars, and tubes, etc. And air condition tubes are drawn by carbide floating plug which is a very special drawing tool.

Tungsten carbide drawing die is produced by powder metallurgy with components of tungsten carbide and cobalt.?Because of the high wear resistance, excellent polishing, small adhesion, and small friction, our carbide drawing dies can provide a long lifetime.

Meetyou Carbide dies can be relied upon to draw the shape you want within the tolerance required. Special coatings like titanium nitride/titanium carbide or vanadium carbide are available on request to further enhance die life.

Sinterizzazione
ANCA.

Gli avanzati forni HIP controllati da computer vengono applicati per fornire più pressione durante il processo di sinterizzazione al fine di ottenere una struttura più densa.

Polvere
Eccellente.

Selezioniamo e controlliamo attentamente l'eccellente qualità delle nostre polveri grezze. La tecnologia di essiccazione a spruzzo di polvere garantisce l'uniformità della distribuzione delle particelle.

in lavorazione
In casa.

Offriamo ai clienti una vasta gamma di servizi di lavorazione in loco, tra cui rettifica senza centri, rettifica cilindrica CNC, rettifica interna CNC, elettroerosione a filo e incisione laser, ecc.

Types of carbide drawings die

Carbide Wire Drawing Dies

The wire drawing process involves drawing a wire of a larger diameter through a die with a smaller diameter bore. This reduces the diameter of the wire to produce the desired size and tolerance of the wire, while the volume remains the same.

copper wire drawing
bronze-bar

Carbide Bar Drawing Die

Drawing bars and rods is similar to drawing wires, only they tend to be much thicker. A wide variety of metals are used for this purpose, including many steel and copper alloys.

Carbide Tube Drawing Dies

The process is similar to the wire drawing process. However, a mandrel is used to form the inner dimensions of the tubing. The mandrel is placed at the throat of the die and used to?determine?the wall thickness and inner diameter. A properly formed mandrel will provide for a smooth surface on the inside of the tube?or pipe.

bronze-tubes
carbide-shaped-drawing-die

Shaped Carbide Drawing Dies

No matter which kind of shape, we can provide customized solutions for you. Here are some typical shaped carbide drawing dies:

  • Round Drawing Dies
  • Hexagon Drawing Dies
  • Square Drawing Dies
  • Rectangle Drawing Dies
  • Custom Shapes

OEM Servizio Clienti

Possiamo sviluppare gradi secondo le vostre esigenze e realizzare la stessa forma del vostro disegno. Sono disponibili anche la marcatura laser e il pacchetto neutro per i vostri vantaggi.

Il voto

Grafico dei voti
Grado
? ?Density（g/cm2）
TSR（MPa）
Hardness（HRA）
Grain Size(um)
YG3X15.1≥1700≥920.8
YG614.9≥2150≥902
YG6X14.9≥2300≥91.50.8
YG814.8≥2800≥89.82
YG1514≥3000≥87.52
L'applicazione

? Steel wire
? Stainless steel wire
? Copper wire
? Aluminum wire
??Tungsten wire
? Various other ferrous and non-ferrous metal wire types

?

YG3XExcellent wear resistance,suitable for drawing steel,nonferrous metal and alloy wires less than Φ2mm under low stress,especially having better effect for drawing fine wires less than Φ0.6mm.
YG6Good wear resistance, suitable for drawing steel wires, nonferrous metal wires and alloy wires or bars less than Φ20mm under low stress, also for drawing tubes less than Φ10mm.
YG6XGood wear resistance, suitable for drawing steel wires, nonferrous metal wires and alloy wires or bars less than Φ6mm under low stress.
YG8Good wear resistance and strength, suitable for drawing steel, nonferrous metal and alloy bars less than Φ35mm.
YG15Suitable for drawing steel bars and tubes under very high stress.
Più prodotti